New Mexico Electrical Journeyman Exam Preparation

Click "Add to Cart" to Enroll Today!

Original price was: $795.00.Current price is: $595.00.

**Please confirm your state before the purchase.

For more information, please click the tabs below the Description.

The New Mexico Electrical Journeyman exam preparation has been our specialty since 1972. School enrollment is complete with a comprehensive Home Study Computer Program, Tutoring, and Seminars with real questions, answers, code references, and calculations to help you pass the actual PSI state licensing exam.

 

The Contractors School Offers the Only Complete 3-In-1 System Consisting Of:

1)  New NEC 2017 Home Study Computer Program with 20 excellent practice exams to simulate your actual PSI state exam!
2) Weekend Seminar or Webinar!
3) Engineering tutoring help!

 

Our sample exams simulate all 3 PSI exams. To obtain a Journeyman license, each candidate must pass all three trade portions of the Electrical exams:

  • Code portion (open book) Test 1
  • Theory portion (closed book) Test 2
  • Practical portion (hands-on) Test 3

 

While most of our students pass their exams in 4-6 weeks, our system is a three-month enrollment and allows for unlimited Home Study (computer software subscription), Seminars, and Tutoring for a three (3) month period. Topics include residential, grounding, lighting, cable protection, overcurrent, branch circuits, and more. Questions, answers, and article references that you need to pass the new PSI state examination are contained in this new program. Choose this program if you are serious about passing your state exam with PSI. Go into the test prepared with the best Home Study Computer Program in New Mexico!

Below Is a Small Sample of Our Exam Prep Questions:

1. According to the New Mexico Electrical Code, where a service mast is used for the support of service drop conductors, it shall be a minimum of how many inches trade size rigid metal conduit?

  • Correct Answer: NMAC 14.10.4.11(F)(2) … minimum 2 inches

 

2. What would be the calculated minimum size feeder circuit conductors for Multiple Motors on the same feeder given the following conditions? (230 volts, Three-Phase, Motor 1: 10 HP, Motor 2: 2 HP)

  • Correct Answer: NEC – 430.6, 430.6(A)(1), Table 430.250, 430.24, Table 310.15(B)(16), Calculate; 28 amperes x 1.25 = 35 A + 6.8 A = 41.8 amperes. 8 AWG.

 

3. What would be the maximum conductor ampacity permitted given the following installation? (Ten conductors, 12 AWG, THHN, 86 degrees F.)

  • Step_1: Table 310.15(B)(16) lists 30 amperes.
  • Step_2: Table 310.15(B)(3)(a) lists 10-20 Conductors at 50%. 
  • Step_3: Table 310.15(B)(2)(a) lists a correction factor for 86 deg F, 90 deg C wire at 1.00.
  • Step_4: Calculate; 30 amperes x 0.50 x 1.00 = 15 amperes.

 

4. What would be the minimum size electrical box given that four 2″ conduits enter the side of the box, and four 2″ conduits also exit the bottom of the enclosure (assume a 600 V external installation)?

  • Correct Answer: NEC – 314.28(A)(2),  Simply calculate: 2″ x 6 = 12″ +2″ +2″ +2″ = 18 inches by 18 inches

Codebooks highlighted in red are provided by our School via PDF files within the Computer Program. For the latest revision of approved references, please reference this website address: https://test-takers.psiexams.com/okcontractors.

Approved Reference List:

  • NFPA 70 – National Electrical Code (either the 2017 or 2020 edition of the NEC can be used for the PSI exam.)
  • NM Electrical Code (NM 14.10.4) 2017
  • National Electrical Safety Code, 2007

 

Important Note: Reference materials may be highlighted, underlined, and tabbed. However, personal NOTES written or attached in any way in the codebook(s) is NOT permitted by the testing agency PSI.

License candidates must be pre-approved prior to testing with PSI. Applications submitted are usually processed in 2-3 weeks, at which time PSI will mail each license candidate a postcard (or email) to indicate approval to take the examination.

  • Part 1 Code Examination: 50-question exam, 145-minute time limit, minimum test score of 75%.
  • Part 2 Theory Examination: 50-question exam, 135-minute time limit, minimum test score of 75%.
  • Part 3 Practical Examination: 120-minute time limit, minimum test score of 75%.

 

State Application Fee: $75.00

PSI Test (Combination Fee): $206.64 total ($68.88 x 3)

Experience Requirement: 4 years of on-the-job training under the supervision of an Electrical Contractor, Master Electrician, or Inspector.

 

Applications must be submitted to PSI (Construction Industries Division Regulation and Licensing Department) at:

2820 Broadbent Pkwy NE, Suite E&F, Albuquerque, NM 87107

(877) 663-9267

CID Website: https://public.psiexams.com/

PSI Website: https://candidate.psiexams.com/

Testimonials

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

FAQ

Why wait? Contact us or call Victor Rubio today. Click the ADD TO CART button at the top of this page to start your New Mexico Electrical Journeyman exam preparation with Prep at Home.