New Mexico Electrical Contractor with Business Law Exam Preparation

Click "Add to cart" to enroll today!

Original price was: $995.00.Current price is: $795.00.

Confirm your State before the Purchase

For more information, please click the tabs below the Description

Ready to enroll or have questions? Contact Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART

New Mexico Electrical Contractor and Business and Law exam preparation is our specialty since 1972. School enrollment is complete with Home Study Computer Program, Tutoring, and Seminars with real questions, answers, code references, and calculations to prepare you for the actual PSI state licensing exam.

 

The Contractors School offers the only Complete 3-in-1 System consisting of:

1) New NEC 2017 Home Study Computer Program with 20 excellent sample exams to simulate your actual PSI state exam!
2) Weekend Seminar or Webinar!
3) Engineering tutoring help!

 

Our sample exams simulate all 3 PSI exams. To obtain a Contractor  license, each candidate must pass all three trade portions Electrical exams and the Business & Law portion!

  • Commercial portion Test 1
  • Residential portion Test 2
  • Specialties portion Test 3
  • Business & Law portion

 

While most of our students pass their exams in 4-6 weeks, our system is a three month enrollment and allows for unlimited Home Study (computer software subscription), Seminars, and Tutoring for a three (3) month period. Questions, answers, and article references that you need to pass the new PSI state examination are contained in this new program. Choose this program if you are serious about passing your state exam with PSI. Go into the test prepared with the best Home Study Computer Program in New Mexico!

 

Click ADD TO CART at the top of this page to begin your studies today!
Why Wait? Call Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART

Below is a small sample of our exam prep questions:

  1. According to New Mexico electrical code, overhead service support shall comply with the serving utility requirements or be at least how size pressure treated timber or equivalent round poles?
    • Correct Answer: NMAC 14.10.4.11(P)(2)(b)  … 6×6 inches
  2. Fire pump power circuits, wiring methods, and load calculations shall comply with the requirements of the NEC. Therefore, calculate the required minimum ampacity of the conductor size, given the following multiple loads? (Fire pump at 88 amps, Maintenance pump at 10.6 amps, Accessory Equipment at 10 amps)
    • Correct Answer: NEC – 695.6(B)(1), Calculate; 88.0 amps + 10.6 amps = 98.6 amps, then x 125% = 123.25 amp. Then add all the loads; 123.25 + 10.00 = 133.25 amps.
  3. Calculate the maximum standard rating of a motor branch circuit, short circuit, or ground fault protective device given the following conditions? (230 volts, Single Phase, 2 HP, Inverse Time Breaker)
    • Step_1: Table 430.248 lists the FLC at 12 amperes..
    • Step_2: Table 430.52 lists the multiplier at 250%, then multiply 12 amperes x 2.50 = 30.0 amperes
    • Step_3: Table 240.6(A) lists a standard rating fuse as 30 A.
  4. If FOUR ungrounded supply conductors are paralleled in two separate raceways, what would be the MIMIMUM supply side bonding jumper required between the 1,000 amp Service and the steel frame of the Commercial Building? Assume the individual supply conductors for this installation are size 250 kcmil conductors?
    • Correct Answer: NEC – Table 250.102(C)(1), Four (4) 250-kcmil ungrounded conductors are in parallel. Therefore, calculate; 250 kcmil x 4 = 1,000 kcmil, so slide down the left column to “Over 600 through 1100” then over to size the supply-side bonding jumper at 2/0 AWG .

 

Why Wait? Call Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART

Codebooks highlighted in red are provided by our School via PDF files within Computer Program. For the latest revision of approved references please reference this website address https://test-takers.psiexams.com/okcontractors.

Approved Reference List:

  • NFPA 70 – National Electrical Code  ( either the 2017 or the 2020 edition of the NEC can be used at the PSI exam. )
  • NM Electrical Code (NM 14.10.4) 2017
  • National Electrical Safety Code, 2007

Important Note:

  • Reference materials may be highlighted, underlined, and tabbed. However, personal NOTES written or attached in any way in codebook(s) is NOT permitted by the testing agency PSI.

 

Why Wait? Call Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART


Why Wait? Call Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART

License candidates must be pre-approved prior to testing with PSI. Applications submitted are usually processed in 2-3 weeks, at which time PSI will mail each license candidate a postcard (or email) to indicate approval to take the examination.

  • Part 1 Commercial Examination: 80 question exam, 200 minute time limit minimum test score 75%
  • Part 2 Residential Examination: 40 question exam, 100 minute time limit minimum test score 75%
  • Part 3 Specialties Examination: 50 question exam, 135 minute time limit minimum test score 75%

 

State Application Fee: $36.00
PSI Test (Combination Fee): $269.06 total ($89.69 x 3)

Experience requirement: 4 years on-the-job training under the supervision of an Electrical Contractor, Master Electrician, or Electrical Inspector.

 

Applications must be submitted to PSI (Construction Industries Division Regulation and Licensing Department) at:
2820 Broadbent Pkwy NE, Suite E&F, Albuquerque, NM 87107
Telephone: (877) 663-9267
CID Website: https://public.psiexams.com/
PSI Website: https://candidate.psiexams.com/

 

Why Wait? Call Victor Rubio 505-934-1212 Click to call now!, or click ADD TO CART

Testimonials

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Prep At Home “The Contractor and Journeyman Exam Preparation School” we are on our third generation of professional staff members.

Quick Links -

Educational Consultants -

• Josh Atwood

(405) 658-0005

• Natasha Gonzalez

(713) 299-4836

• Victor Rubio

(512) 667-0481

• Daniela Gonzalez

(214) 399-0655

Customer Support -

8 am to 5 pm CST M-F

• Erika Martinez

(512) 808-6330

• Katie Sandoval

(512) 820-8685

© 2024 The Contractors School | All Rights Reserved | Maintained by WSI Web Enhancers